Cabinet Hardware & Drawer Pull Spacing Calculator
Calculate drill hole positions from edges, center-to-center pull spacing, and single vs dual pull layouts on kitchen cabinets.
Input Parameters
Enter dimensions and specifications to estimate materials.
Drill Hole Position
Total Hardware Pieces
30pieces
Distance Between Holes
3.75in
Rule-of-Thirds Placement
8in
Hardware Style
Centered Pull
Pull Centre-to-Centre
3.75in
Screws Needed
42screws
Material estimates include recommended trade waste buffer. Always confirm dimensions on site prior to ordering.
How The Calculation Works
Formulas, material coverage assumptions, waste buffers, and rounding standards.
Hole positions are measured from each edge so the pull ends up truly centred — measuring from one side and marking the second hole from the first compounds any error across the run.
The rule-of-thirds position is given as well, which is the conventional placement for pulls on cabinet doors: roughly one third up from the bottom rail on an upper door, and one third down on a lower.
Screw count assumes two per pull and one per knob, which is what ships in a standard hardware pack.
You May Also Need
Common complementary tools used alongside this calculator for complete project estimation.
Electrical Wire Gauge & Voltage Drop Calculator
Calculate recommended AWG wire gauge (14, 12, 10, 8, 6, 4) and verify voltage drop is under the 3% NEC limit for 120V/240V circuits.
Plumbing Supply Pipe Sizing Calculator
Size main water supply and branch lines (Copper/PEX) based on Water Supply Fixture Units (WSFU) and peak flow rate GPM.
Epoxy Flooring Cost & Coating Calculator
Calculate epoxy flooring square footage, coating kits, gallons, decorative flakes, and cost per square foot for residential, commercial, or garage floors.
Home Renovation Loan & Payment Calculator
Calculate monthly payments, total interest, and financing costs for home renovation loans, HELOCs, and home equity lines of credit.
Flooring Cost Calculator
Estimate square footage, box requirements, waste factors, and total material costs for hardwood, laminate, vinyl plank, and tile.
Grout Calculator
Calculate pounds or kilograms of sanded, unsanded, or epoxy grout needed based on tile dimensions, joint width, and depth.
Frequently Asked Questions
Practical installation guidance and purchasing tips for cabinet hardware & drawer pull spacing calculator.