Paver & Patio Base Calculator
Calculate patio paver counts (12x12, 6x9, 4x8), 1-inch bedding sand volume, crushed stone base, and edge restraints.
Input Parameters
Enter dimensions and specifications to estimate materials.
Total Pavers Needed (with Waste)
Surface Area
192sq ft
1" Bedding Sand
0.8tons
Compacted Gravel Base
3.3tons
Edge Restraints
56linear ft
Material estimates include recommended trade waste buffer. Always confirm dimensions on site prior to ordering.
How The Calculation Works
Formulas, material coverage assumptions, waste buffers, and rounding standards.
Calculates total patio square footage and converts selected paver dimensions into square feet.
Computes 1-inch bedding sand layer (approx 1 ton per 100 sq ft) and 4-6 inch compacted crusher-run base.
Determines snap-edge restraint linear footage along the exposed perimeter.
You May Also Need
Common complementary tools used alongside this calculator for complete project estimation.
Concrete Volume & Bag Calculator
Calculate concrete volume in cubic yards, cubic meters, ready-mix truckloads, and 40lb/60lb/80lb bags for slabs and footings.
Concrete Slab Cost & Volume Estimator
Comprehensive estimator for concrete slabs: ready-mix yards, sub-base gravel, rebar grid, edge forms, and material cost.
Retaining Wall Block Calculator
Calculate retaining wall blocks (4x12, 6x16, 8x18), buried base courses, cap blocks, and drainage gravel backfill.
Brick & Mortar Wall Calculator
Calculate standard and modular brick quantities, pre-mixed mortar bags, and masonry sand for single or double wythe walls.
Rebar & Mesh Reinforcement Calculator
Calculate 20ft rebar sticks, grid intersections, tie wire pounds, and support chairs for concrete slab reinforcement.
Tile Calculator
Calculate square footage, exact tile counts, waste buffers, and box quantities for straight, diagonal, or herringbone layouts.
Frequently Asked Questions
Practical installation guidance and purchasing tips for paver & patio base calculator.